Homemade Go-kart 200cc PALETTE !?

Add a chain tensioner and drive it on pavement and it could be pretty fun

Nice build.
I've tried making stuff from pallets. I found that under cyclic loads a lot less than this is going to see, the nails holding the pallet together work themselves loose.
So you need to reinforce the pallet with screws.
Also, you should add a foot brake. And probably a foot throttle too.

So, grass-mowners are fullfilling their cart-racing dreams as a substitute

16:43 haha bro this chain should have tensioner or at least the engine should be adjustable to
tension the chain. amazing project tho. saves time and money ! 💪

It could use some ground clearance as well as suspension. But I'm thoroughly impressed overall. Are you going to keep it and continue to modify it or just leave it as it is?

That's really a great idea.It can even be built without any welding.Thanks Doc./To je stvarno sjajna ideja. Može se čak izgraditi i bez zavarivanja. Hvala Doc.

Personally, I like the 'rat rod' look. I think it would look a lot better with holes drilled in the red lever and other metal and bars, rust and corrosion, and a little more 'patina' to it. But still, definitely a great idea! :)

Now that's what I'm talking about . Type in easy cheap way and you wont find it as simple as this... great job.. Strange thing is for the past 3 days I've been looking up how to make a go cart cheap with minimal basic tools . And this just came up . Lol ...HELL YA

I really love that, cools

First go-cart I built was 18 feet long, had 6 lawnmower wheels held with four 16 penny nails each wheel into scrap wood and two sets of 4 baby carriage metal frames and wheels. It took the entire neighborhood of kids to roll it the 1/4 mile to the only hill in the area. It was only when we actually got it on the hill that we realized the hill was 25 feet long and had to be started on slope or the bottom would hit. So, every kid loaded on we literally rolled 7 feet...once...then all the kids went home and I had to use the hammer I brought (for repairs) to hack it apart to get it home.

Karting out of a wooden pallet... 😀 I certainly didn't expect that. Thanks for the good cheer!

Ida mounted it on alittle bit of a longer pallet tho...

Hell yeah dude! Badass build!
I have some 8ft. pallets I've been thinking about building a go cart out of, but different from yours. Now I really want to!
I have 4 projects lined up first, then it's on!

Very nice, you could've also used the break handle as a pedal. Would've been less of a dangly string then!

You make go karts with everything and it’s really really cool 👍

It sounds exactly like what I would expect a motorized pallet to sound like.

Good job

this is my favorite build of yours. great job

Parabéns garoto muito sucesso pra você

i like the idea of the pallet frame, but I would mount foot pedals for the throttle and brake and give it a little more ground clearance by mounting it on motorcycle wheels.

That’s the fanciest pallet I’ve ever seen. The ones I work with would fall apart in no time

Sie hatten eine wirklich brillante Idee.
Mach so weiter, du wirst noch viel mehr erreichen

Odlično napravljeno svaka čast super projekat , samo naprijed .

Очень широкая база получается по ходу пьесы, а в целом не сложный проект! Посмотрел с удовольствием.

Bro,,, how long did it take you to make it???
🇯🇲🇯🇲🇯🇲🇯🇲🇯🇲🇯🇲🇯🇲🇯🇲🇯🇲🇯🇲

Когда отлетит цепь🤣🤣🤣🤣

Uklad kierowniczy pęknie na pierwszych wybojach, niebezpieczne jest to co on zrobił nie wygina się gwintów bo pękają

it looks like you had a lot of fun building it 😄👍

You can certainly drive flat out on this Go-kart !

I don't think this would pass a wka race inspection. Lol. Pretty good idea though. I have a lot of those left over parts from when my dad and I raced. Unfortunately he passed away back in 2017 and left me a bunch of inventory from when sold parts and methanol at our races.
Thanks for the awesome video.

Geniusz, po prostu geniusz!!!

Надо было заднюю ось крепить на нижние доски, а то получается, что вес сзади висит на саморезах, которыми эти верхние наружные доски прикручены к поддону.

it turned out to be a great go-kart, but I would have converted it into a lawn mower!) this thought dawned on me as soon as he drove out onto the grass. thanks a lot for the new ideas!

I was planning to do something like this but with a pedal go kart. I stead of the pedals attached to the wheels, there'd be an engine/electric motor.

im making one excactly the same as this for my channel with no credits

Все отлично,но встает вопрос,для чего нужно проделать такую работу и сделать на базе поддона, если можно уже сварить полноценную раму из трубы?

@Muito top amigo excelente e a imaginação fértil.👌👍🇵🇹

Bože 1M ,očito ljudi vole ovakve stvari ,bilo je posla ali ne kao kod drugih projekata ,💪❤️🔥

Konstrukcja gokarta świetna, typ chyba planuje swoją śmierć w pięknym stylu na palecie epal 🤣

Enhorabuena por el trabajo, me gusta ver jóvenes con ingenio

Love your go kart, Great job using a palette. 🙂🙃🙂🤘🤘🤘🤘🤘🤘🤘🤘🤘🤘

Perfekter Fun unglaublich das das alles mit Einhell geht aber Respekt und Mutig .
Wirklich sehenswert .
Top 👍👍👍

Unbelievable Work and Equipment & Tools that you have m8 really good work that you do.

Awesome! Nice use of every tool offered to mankind

Zamilsi ideš do grada sa ovim 😂😂😂
Usput,pre moćan projekat Doktore 😁😁👌👌💪💪

Proszę ten gokart

Very nice work! Very low budget build. What size are the wheel hubs?

That's awesome no big spend love it😀

رائع

Only thing I would've added is 2metal plates for your feet to rest on. That is a sick build 👏

Damn i wanna buy that; that is so amazing!

esta genial pero debería tener el acelerador del lado derecho también , para tener una mano siempre en la dirección

criativo colocar o disco no eixo perto da coroa muito top🤙

We used to make 2x6 x 5 ft wooden push carts,back in the 60s,your buddy pushed it with a broom handle! Great fun ,when he's pushing ,till it was your turn to push!

That is the way to recycle pallets good idea.
Kind regards from London UK.

Nice, What’s the size of the rims and tires that you used?

We got pallets where I work, so I'll have to get one and make this!😁👍🛠️

So just happened to have all the exact parts required at home :-)

Helps to have 3/4 of a go-kart to start with lol.

Let's take this master to a much higher level, because he's crazy🤪😍

What is the name of those things you used to hold the axle

When you're done you can use a pallet Jack to haul it around or pick it up with a forklift

I'd be more impressed if you made a pallet out of a go cart.

Wow that’s awesome great job.

Is the traction on one wheel, left or right? or is there a difference?

A few steel banding straps around that pallet would make it all stay held together, well. ✅

That chain looks awefully dangerous, would have put a guard on it

Boa tarde!! Faz um com motor de arranque de carro !!!!

Cool. Hope it turns up as an extra in Mario Kart

where do you get all the parts from ??

zuzuschauen hat ein riesen Spaß gemacht, danke dafür!

Se colocar um disco giratório na frente dá pra fazer um cortador de grama.

Super videi, volim tvoj rad ❤️🙌👋👋🔥👏👏

It’s meant for a flat surface cuz it has no suspension, build a bar stool with motor

Great idea and great job

those must be easy to stack in the warehouse.

He’s forgot one vital thing !!!!
Some green ‘one coat’ fence care 🤣
Excellent job !!!!!

8:44 Turning the wheel shouldn't be shifting the gears!

SUPER IDEA,,,GREAT WORK

Yeah all the parts I need happen to be all in this one bin...😁

palettes usually get wasted so its nice seeing them get recycled

Best build I have ever seen.

Excellent experience 👏 👌 👍

Wish I had a shop to work like that

lots of metalworking tools and skils needed for this "pallete" go-kart

That chain looks awefully dangerous, would have put a guard on it

When he was riding across the grass I kept expecting to see grass flying out the side/back lol

grande!!! servirebbe giusto una pedana dove poter appoggiare i piedi!
forse, alzandolo un po' da terra eviteresti il contatto di freno e corona.
comunque ottimo lavoro!! 👍🏻💪🏻

cool car, 😀and in your next video , we want see a 🪓🔩"E-Pal.- cart- camper" 🪚🪛🔨

Fantastic ! the first racing pallet on the planet😂😂😂

Cool! What are the estimated Costs to make one of these ?

Well you managed to mess that up on the first try. One-dimensional one board suspension when you got a whole other side of the pellet not being utilized. That only that dragon deadweight.

those steering rods not gonna last long,too flimsey

I must have missed something, but what keeps the rear axle from sliding back and forth?

Easy to put away if you got a forklift

Love the video work brilliant

Needs bigger wheels and a new testride

A great job my friend. Best of luck & success always👍👍

Fantástico, Fantástico, felicitaciones

nice and cool job !